\documentclass[17pt,xcolor=table]{beamer} 
\usepackage{beamerthemesplit}
\definecolor{sbhs}{RGB}{255,69,50}
\definecolor{sbhs1}{RGB}{255,97,73}
\setbeamercolor{structure}{fg=sbhs}
\setbeamercolor{alerted text}{fg=sbhs1}
\beamertemplateshadingbackground{blue!5}{yellow!10}
\logo{\includegraphics[height=1cm]{3t-logo.pdf}}
\usepackage{verbatim}
\usepackage{bm}
%\usepackage{txfonts}
\newenvironment{colorverbatim}[1][]
{
\color{blue}
}
{
\endverbatim
}

\begin{document}
\sffamily \bfseries
\title
[\scriptsize {Accessing SBHS on windows}]
{Accessing SBHS through Scilab on Windows}
\author [Rupak Rokade]
{\small Talk to a Teacher \\
http://spoken-tutorial.org \\
National Mission
  on Education 
  through ICT \\ 
http://sakshat.ac.in \\ [0.5cm]
  Rupak Rokade \\IIT Bombay \\ [0.4cm]
{\small 7 March 2015}}
\date{}
\begin{frame}
   \titlepage
\end{frame}

\begin{frame}[fragile]
\frametitle{Objectives}
We will learn
\begin{itemize}[<+-|alert@+>]
\item To set up serial communication between Scilab and SBHS
\item To perform Step Test experiment
\end{itemize}
\end{frame}


\begin{frame}
\frametitle{System Requirements}
For this tutorial, I am using 
\begin{itemize}[<+-|alert@+>]
\item Windows-7 OS
\item Scilab 5.3.3
\end{itemize}
\end{frame}


\begin{frame}
\frametitle{System Requirements...}
\begin{itemize}[<+-|alert@+>]
\item You may download Scilab from:\\
www.scilab.org
\item To install Scilab, watch the Scilab spoken tutorial series on \\http://spoken-tutorial.org
\end{itemize}
\end{frame}




\begin{frame}[fragile]
\frametitle{Prerequisites}
Watch the following tutorials

\begin{enumerate}
\item Introduction to Xcos
\item Connecting SBHS to computer
\end{enumerate}
The relevant tutorials for these, are available in this series, on {\color{red}http://spoken-tutorial.org}
\end{frame}


\begin{frame}[fragile]
\frametitle{COM Port identification}
\begin{enumerate}
\item For RS232 the port number will be COM1
\item For USB it will be greater than COM1 i.e. COM2, COM3... etc
\item Note down the appropriate COM number
\end{enumerate}
\end{frame}

\begin{frame}[fragile]
\frametitle{COM Port setting}
\begin{enumerate}
\item A two digit COM port number cannot be used
\item This is because scilab serial toolbox works only with single digit COM port number
\item Change the COM port number if it is two digit
\end{enumerate}
\end{frame}

\begin{frame}[fragile]
\frametitle{TCL/TK Error}
In case  a TCL/TK related error is displayed, 
\begin{enumerate}
\item Reconnect the USB cable connected to the SBHS and execute the file again.
\item Check once if the COM port number has changed.
\item If it still doesen't work, restart Scilab and repeat the process.
\end{enumerate}

\end{frame}

\begin{frame}
\frametitle{SBHS Display}

\begin{center}
	\includegraphics[scale=0.07]{display.jpg}
\end{center}
\end{frame}

\begin{frame}[fragile]
\frametitle{Notes}
\begin{enumerate}[<+-|alert@+>]
\item Values of Fan, Heater and Temperature should be same as shown on the SBHS display
\item If not then Scilab is not communicating with SBHS
\end{enumerate}
\end{frame}

\begin{frame}
\frametitle{SBHS LEDs}

\begin{center}
	\includegraphics[scale=0.08]{LEDs.jpg}
\end{center}
\end{frame}

\begin{frame}[fragile]
\frametitle{Start.sce}
\begin{enumerate}[<+-|alert@+>]
\item Recommended only after firm understanding of the process is gained.
\item Port number provided in  \\ser\_init.sce file must be correct.
\end{enumerate}
\end{frame}

\begin{frame}
\frametitle{Resetting SBHS}

\begin{center}
	\includegraphics[scale=0.15]{reset.jpg}
\end{center}
\end{frame}


\begin{frame}[fragile]
\frametitle{Summary}
In this tutorial, we have learnt how to,
\begin{itemize}
\item Set up serial communication between Scilab and SBHS
\item Perform Step Test experiment
\end{itemize}
\end{frame}

\begin{frame}
\frametitle{About the Spoken Tutorial Project}
\begin{itemize}
\item Watch the video available at {\color{red} http://spoken-tutorial.org /What\_is\_a\_Spoken\_Tutorial}
\item It summarises the Spoken Tutorial project 
\item If you do not have good bandwidth, you can download and watch it
\end{itemize}
\end{frame}

\begin{frame}
\frametitle{Spoken Tutorial Workshops}The Spoken Tutorial Project Team 
\begin{itemize}
\item Conducts workshops using spoken tutorials
\item Gives certificates to those who pass an online test
\end{itemize}
For more details, write to \\ {\color{red}contact@spoken-tutorial.org}

\end{frame}

\begin{frame}
\frametitle{Acknowledgements}
\begin{itemize}
\item Spoken Tutorial Project is a part of the Talk to a Teacher  project
\item It is supported by the National Mission on Education through  ICT, MHRD, Government of India
\item More information on this Mission is available at: \\ {\color{red} http://spoken-tutorial.org \\ /NMEICT-Intro}
\end{itemize}
\end{frame}

\end{document}






